Mastercam X6 MU1 (x86/x64)

Mastercam X6 MU1 (x86/x64) | 1.7 GB

These enhancements and updates have been tested and released by the Quality Control Department and will function inside Mastercam X6.
About CNC Software, Inc.

Founded in 1983, CNC Software is one of the oldest companies in the PC-based CAD/CAM industry. The company was built on the concept of providing an inexpensive PC-based CAM system at a time when most other systems were expensive CAD-oriented products. CNC Software was one of the first companies to introduce CAD/CAM software designed for both the machinist and the engineer, providing a practical solutions to both markets. While the original version of Mastercam focused on two-dimensional (2D) CAM, it was also one of the first micro-based CAM packages to include CAD capabilities. With Mastercam, the engineer could construct his or her own parts quickly and easily as well as machine them, for an affordable price.


Mastercam offers solutions for designers and NC programmers in a spectrum of industries, including milling, turning, wire EDM, router programming, plasma cutting, lasers, and 3D design and drafting. CNC Software's customers range from one-person job shops to Fortune 100 manufacturers. The same software that is utilized by corporations such as Boeing, IBM, and Sikorsky is still affordable enough for the small job shop.

About Mastercam X6 MU1

This install is designed to run on top of Mastercam X6. If X6 MU1 is uninstalled, X6 must be installed again. All personalized files in My Mcamx6 and Shared Mcamx6 are left behind, so this should not cause any loss of data. Regardless, be sure to back up your data as a precautionary measure.

To uninstall Mastercam X6 MU1, go to Control Panel > Programs and Features (Add/Remove Progams in Windows XP) and select Remove next to the Mastercam X6 icon.

This version will not expire. You must have a maintenance date of February 29, 2012 or later to run this release.

Mirror :

Mirror2 :

Mirror3 :