Altium Designer Winter Portable

Altium Designer Winter Portable | 1.23 GB

Altium Designer Winter - Integrated design of electronic devices at the level of PCB and FPGA. Also present in the assembly Portable version. Altium Designer Winter
Altium Limited is a new version of an integrated system design electronic devices at the level of PCB and FPGA Altium Designer Winter.

Key additions
Introduced master debugging platform Plug-n-Play, which allows to detect and connect to external hardware devices interface with Altium Designer Winter 09.
At the stage of development fees significantly improved speed and performance characteristics, including the empowerment of online tracking and work in three-dimensional mode.

The next step in interactive tracing
Integrated circuits optimized by changing the findings and interactive routing enable developers to replace the conclusions (subchain) during the execution trace for single chains, and for the differential pairs.
The new trace differential pair is designed with the use of technology and the rounding of the repulsion of obstacles, as well as track completion.
In the new interactive trace tires are added all the usual online tracking.

Empowering design fees
In Altium Designer Winter 09 made a few changes that help to empower the development of circuit boards, for example:
Description of the parameters separately for the contact pad layers, it is necessary to connect the holes with different connections on different signal layers. This allows the board to increase the manufacturability and density of the topology.
Offset holes on the pad, which makes it possible to use a generalized seat, designed for installation of components with different buildings.

Improved graphics performance for 3D
The new high-speed graphics engine 3D, embedded in the card editor Altium Designer two issues ago, will significantly reduce the load on users' workstations. In Altium Designer Winter 09 system has been optimized, due to what was not only increased the performance of graphics processing, but also reduced the load of the hardware.

Check the rules of adaptability in real-time
The new rules allow you to check the draft boards to generate output files, which in turn accelerates the transmission of the board in production. To check the manufacturability of the following rules:
o Minimum Solder Mask Silver - defines the minimum width of the plot in a protective mask to determine the bottlenecks that create problems in the manufacture of the board.
o Hole to Hole Clearance - determines the match and the intersection of the holes to the use of tools CAM. This rule is also necessary for the deaf and blind vias.
o Silk over Exposed Copper - sets the gap between the label and opening of the mask metallized pads.
o Minimum copper width - an analysis of all sections of the metallization to be formed in the manufacture of the board.
o Silk to Silk Clearance - guarantees the legibility of markings on the leaf.
o Net Antennae - determines the unconnected parts of lines and arcs on the signal layers (unfinished track, extending from the vias and pads).

Among the innovations is also possible to note the appearance of control and instrumentation panels, using software tools for FPGA-based systems, release management projects, the ability to identify the component supplier base through the code and support for importing from the system Zuken Cadstar.


Mirror 2:

Mirror 3:

Mirror 4: