Mac OS X Snow Leopard 10.6.8 (2011/RUS/ENG) | 3.56 GB
Single Extraction - InterChangable - No Password

Mac OS X, known for its simplicity, reliability and ease of use. Therefore, when the idea of ??developing Snow Leopard, Apple engineers have set themselves only one goal: to make a good system even better. They pointed out areas in which you can improve, accelerate and simplify the system - from extraction to external media installation. And in many ways they could make an excellent excellent.
Additional Information:
The updated OS SL 10.6.8
Supports MBR, NTFS read and GTP
PS / 2 and USB Controllers
Drivers NVidia (Driver Release 256.02.25 Snow Leopard including 465/470/480/560/570/580/590)
Ati Radeon 6xxx
Universal audio driver (VooDooHDA 2.7.1 - Yasien mac, working on my ALC892 5.1)

• It is advisable to put on a separate HDD.
• A Windows
• For SATA drives set AHCI mode
1) Install R Drive Image 4.7.4725 (in the image)
2) Run by Administrator
3) Select the Restore
3.1) Mount in DT or any other software image SL_1068.iso
4) Select the file on the image SL.ARC
5) Specify the click of a mouse from the top section of Snow (see screenshot) and section (hard drive) where we want to deliver. (Not on drive C, in a separate volume) Section 12000 requires MB Primary (Primary)
6) Click to deploy
6.1) After a successful reversal of the image, click reload. No other manipulations more to do.
7) Boot

After a successful startup recommend doing this:
Run in Terminal. After the end - to be restarted.
sudo rm-rf / System / Library / Extensions.mkext
sudo rm-rf / System / Library / Extensions / Caches / & & sudo rm-rf / System / Library / Caches /
sudo update_dyld_shared_cache-debug-force-root /
sudo defaults write / Library / Preferences / Compositor-dict deferredUpdates 0
sudo diskutil repairpermissions /
sudo update_dyld_shared_cache-root /-force
sudo periodic daily
sudo periodic weekly
sudo periodic monthly
sudo reboot


Create a device:
1) Run USB Image Tool, on behalf of the Administrator
2) Select the Device Mode
3) Select the flash drive and click Restore
4) Select the image 1068.imz (to display the file type to change)
5) After the successful reversal of the image on a flash drive boot from it

About the increase in the partition with Mac OS, use Paragon Hard Disk Manager.
Right-click on the section of "Snow", choose Edit / Move partition. Next, move the slider to the end of the selected partition and click OK.

Manual for working with kekst_utilitoy and More:
I advise beginners to use KextUtility for cupcakes. Usage:

Copy utility, for example, in the Programs folder - System Utilities.
For a general treatment of the system - just run the utility.
To install kekstov (s) - throw it (them) on the icon of the utility.
To treat a single folder with kekstov (except for the system)
and a mkext file - throw this folder on the icon utility.
To uncompress the file mkext - throw the file on the icon of the utility.

User-friendly. but for a long time. You could:
cd / System / Library / Extensions
We will show that there Kext:
ls-da VoodooPowerMini.kext
If we get something like this then continue:
drwxr-xr-x 3 root wheel 102 Aug January 2009 VoodooPowerMini.kext
Kext is found, delete it
rm-Rf. / VoodooPowerMini.kext
Now we need to remove the cache Kext-s (This command is valid only for the Snow Leopard, for Leopard Extensions.mkext located in / System / Library):
rm / System / Library / Caches / / Startup / Extensions.mkext
Now we need to create a new cache, which is no longer a remote Kext-a. There are several ways to do this:
Just to update the date to the folder Extensions and wait until the system automatically builds the cache:
touch / System / Library / Extensions /
Then wait a few minutes and reboot (when the process is active access to the disk as soon as it stops - you can reboot. Do not be afraid to reboot before - system will not do it until you finish the process);
Run the following command to create the cache itself. This is useful if you need to specify additional parameters or collect cash from multiple folders with Kext-s (eg from / Extra / Extensions):
kextcache-v 1-m / System / Library / Caches / / Startup / Extensions.mkext / System / Library / Extensions /

If you need to collect cash from multiple folders, then enter the following command:

kextcache-v 1-m / System / Library / Caches / / Startup / Extensions.mkext / System / Library / Extensions / / Extra / Extensions /

After completion of construction of the cache can be reloaded:


If something goes wrong: a system of false swearing on the right of some files, before you build the cache can try to restore the right of access:

diskutil repairPermissions /

System requirements:
- Processor Intel / AMD with support for SSE2 SSE3 (AMD Llano not supported)
- 512 MB RAM
- 128 MB Graphics Card
- At least 12 GB of free disk space

Single Extraction - InterChangable - No Password