Autodata AutodataCD2 3.18

Autodata AutodataCD2 3.18 | 1.61 GB

Autodata's core business is research, compilation and creation of technical information for use in independent automotive workshops for the repair and maintenance of motor vehicles, motorcycles and trucks. While most of these seminars are not franchised, ranging from small garages to large groups, fast fit and various specialists, a growing number of franchised workshops also need information on vehicles from other manufacturers.

Extras. Information:

Autodata covers a number of issues, including:
Technical data, vehicle identification, service adjustments, lubricants and capacities, ignition system, fuel system, tightening torques, brake discs and brake drums, repair times, wheel alignment, timing belts, chains and timing of transfer of tire sizes and pressures, service illustrations, service schedules, service interval indicators, key programming, diagnostic trouble codes, engine management systems, pin data, trouble shooter, airbags / SRS, air conditioning, ABS, electrical component locations and wiring diagrams.

Installation instructions:

Program to emulate a CD and DVD - DAEMON Tools Pro Advanced
1.Zapuskaete from your disk image Autodata 3.18 CDA3.18_v6.41296_Install. Go on a virtual drive and presses Install.exe. Spend install according to the prompts (when asked to specify the type of installation work full time from the hard drive), when the installer require CD 2 - run from the disk image Autodata 3.18 CDA3.18v6.410GRA_Data. Finished installation according to the prompts.
2.Skopirovat contents of the folder from the archive 3.18 kryak_3.18.ZIP Working in the installation folder (default is C: \ ADCDA2 \) when prompted and click "Replace All."
3.Zapustit Autodata program and test the results.
4.Ustanovit extra disc from the folder AUTODATA CD2, running a disk image AUTODATA. Going on a virtual drive to run Install.exe. Then follow the prompts installer (installation type when prompted to specify the total work from the hard drive).
5.Otkryt Crack folder on the virtual drive disk image and copy it AUTODATA content in the installation folder (default is C: \ ADCD \) when prompted and click "Replace All."
Autodata CD2 6.Zapustit program and test the results