Delcam FeatureCam 2012 R3 SP0 v18.8.1.36 x32/x64 Multilanguage

FeatureCAM, developed by Delcam, is a suite of CAD/CAM software which combines cutting edge technology with ease of use, automates machining and minimizes programming times for parts on mills, lathes and wire EDM.
Delcam's History

In 1965 Donald Welbourn, Director in Industrial Co-operation at Cambridge University, had the vision to see the possibility of using computers to assist pattern makers to solve the problems of modeling difficult 3D shapes.

Today we take for granted 3D modeling, in 1965 only crude 2D drawing systems were available using terminals linked to large main frame computers.

Initial work was sponsored by the Science Research Council but finding money to support the development was a constant problem for Donald Welbourn. In 1973 Donald persuaded his friend Lord Caldecote, then chairman of the Delta Metal Group and an ex-Cambridge engineer, to send Delta graduate engineer Ed Lambourne to work on the development of DUCT at Cambridge University Engineering Department, ultimately leading to transferal of the system into industry. In 1974 Donald also obtained sponsorship from Control Data in Europe in the form of access to their powerful time-sharing computing resources. Control Data offered DUCT initially on its time-sharing bureau service, especially to two of its largest German customers Volkswagen and Daimler Benz.....

About FeatureCAM

FeatureCAM is an easy-to-use CAM system that is so intuitive that even a novice or occassional user can quickly create reliable and consistent toolpaths. The user-friendly automation inside the software ensures training costs are minimized, increasing the return on your investment quickly. You can create toolpaths directly from solids using FeatureRECOGNITION. All your machines can be programmed within a single user interface specifically designed to achieve shorter programming times by Featurebased operations.

Mirror :

Mirror2 :

Mirror3 :