Windows XP SP3 v.2 Fast Install With Acronis (2012/Eng-Rus) 588.13 Mb

Windows XP SP3 v.2 Fast Install With Acronis (2012/Eng-Rus) | 588.13 Mb

The basis of the original distribution assembly taken Microsoft Windows ? XP Professional SP3 VL + IE8, WMP11. The system was installed and updated on the 03/04/2012, then "untied" from the "iron" and is packed with Acronis Backup & Recovery 11. Installed on any PC for 3-5 minutes.

uxtheme.dll, tcpip.sys
Driver packs: Chipset, LAN, MASSSTORAGE, WLAN on Bashrat

1) Expand tib using Acronis Backup & Recovery 11 on the hard drive.
2) Boot the first time and look forward to inviting you to restart and reboot, respectively.
2a) If the system refuses preloaded on the first point, then try to boot via Safe Mode (the button F8)
2b) in the boot menu item "Microsoft Windows XP Professional Multiprocessor PC" is on the case if the first point, the system will not start and after a full installation (including the HAL) you can remove it from the boot.ini
3) Check ustanovennoe equipment and install the necessary drivers
4) On the Desktop folder is taken out "SetUP HAL" which is a batch file Multi-CPU.cmd. It must be run after installation of main equipment if the CPU multi-core
5) Run DisSata.exe after installing SATA / SCSI / RAID
After installation, you can delete the C: \ Setup

MD5: A6C6052C328372E1FA876602D2A3F853
SHA-1: 7B13AC73CA8F8AEC920076BC52E771CBE5F0DF88
CRC32: 0F104AC8

System requirements:
Minimum: 233 MHz, 64 MB RAM (can be limited by some features)
Recommended: P4 c 512MB RAM or more
Free hard disk space: 4GB


Mirror 2:

Mirror 3: