Siemens PLM NX 126.96.36.199 MP01 (x86/x64) | 7.41 GB
Bringing High Definition PLM to product development, Siemens PLM NX redefines productivity with a powerful suite of integrated CAD, CAE and CAM solutions. Siemens PLM NX takes full advantage of the High Definition PLM Technology Framework to improve decision making throughout the product development process.
About Siemens AG
Siemens AG is a German engineering conglomerate, the largest of its kind in Europe. Siemens has international headquarters located in Berlin, Munich and Erlangen. The company has three main business sectors: Industry, Energy, and Healthcare; with a total of 15 divisions. Worldwide, Siemens and its subsidiaries employ approximately 420,800 people in nearly 190 countries and reported global revenue of 76.651 billion euros for the year of 2009. Siemens AG is listed on the Frankfurt Stock Exchange, and has been listed on the New York Stock Exchange since March 12, 2001.
About SIEMENS PLM NX
NX is a next-generation digital product development system that helps companies transform the product lifecycle. With the industry's broadest suite of integrated, fully associative CAD/CAM/CAE applications, NX touches the full range of development processes in product design, manufacturing and simulation.
NX provides a complete suite of integrated process automation tools to enable companies to capture and reuse product and process knowledge encouraging the use of corporate best practice.
What's is fixed in Siemens PLM NX 188.8.131.52 MP01:
Date: 13 March 2012
Subject: Maintenance Pack 1 for NX 184.108.40.206
To: All users of NX 220.127.116.11
From: The Siemens PLM NX Team
We are pleased to inform you that fixes are available for the problems listed below. A maintenance pack (MP1), built for installation on top of Windows32, Windows64 and Linux64 images of NX 18.104.22.168, can now be downloaded from the Siemens PLM FTP server. This maintenance pack fixes an accumulation of problems listed in the table below.
The problem in Assemblies where errors occurred during Wave Link synchronization between the source part and target part is fixed.
The problem in Assemblies where an incorrect Out-of-Date Status was shown on Linked Features is fixed.
The problem where the datums referencing PMI in a JT file did not import correctly is fixed.
The problem in Drafting where cylindrical PMI dimensions to faces were inherited incorrectly is fixed.
The problem where editing a regular expression on a Windows64 platform caused the error: "Attempt to use the "+" operation on unknown dimension" is fixed.
The problem in Assemblies where loading certain JT files caused the session to terminate is fixed.
The problem in Manufacturing where Cavity Mill Trochoidal cut pattern had problems with the initial engage is fixed.
The problem where exploding a User Defined Feature created multiple feature groups is fixed.
The problem in Manufacturing where performance degraded after saving MENCToolActivity Objects is improved.
See Note 1.1 below.
The problem where Part Navigator Feature Group Filters were unresolved after a Save As operation of the part is fixed.
The problem where in some cases creating a Law Extension was slow is improved.
The problem where editing the selection intent in a Face Blend feature caused the face orientation to flip is fixed.
The problem where annotation was not imported onto a drawing in the correct location is fixed.
The problem where refiled part files failed to open with the error “Unknown system unit ID found.” is fixed.
The problem in Assemblies where creation of a component array was not possible if it was created on the initial instance of a Pattern Feature is fixed.
The problem in Assemblies where some updated parts in the Assembly Navigator still shown as out of date is fixed.
The problem in Electrode Design where Electrode Project Initialization failed with the message "Incorrect object for this operation" is fixed.
The problem in NX/Open where a signed .Net library could not be called from another signed .Net library is fixed.
The problem in NX/Open where a signed .Net library call to GetSession failed to return a session object correctly is fixed.
The problem in Synchronous Modeling where some Delete Face features did not update or did not produce correct results is fixed.
The problem where some blend features failed to update is fixed.
The problem where an operation launched from the context menu in the graphics area over a lightweight representation of a component failed to act on the previously selected higher level component is fixed.
The problem in Drafting where Sketch curves were not placed at the same position when copy/pasted the 2nd time is fixed.
The problem in Manufacturing where some Trochoidal Outward motions gouged the part in Cavity Milling is fixed.
The problem where the toolbar and the menu were different when the same button was specified in the custom directory and UGII_USER_DIR is fixed.
The problem where the performance of adding a Reusable Component was slow is improved.
The problem where the position of a Reuse Item changed when the primary parameters were changed is fixed.
The problem in Routing where creating a Linear Path caused the error "Unable to create body" is fixed.
The problem in Die Engineering where starting the Addendum section dialog was slow is improved.
The problem in Manufacturing where the Spindle Speed check box did not remain set when upgrading operations is fixed.
The problem where the mouse wheel failed to zoom after exiting a dialog/dynamic input field is fixed.
The problem in Teamcenter Integration for NX where the UGMASTER directly under an ALTREP could not be opened is fixed.
The problem in Assemblies where changes to the Named Reference of a JT dataset were not visible in NX unless the session was restarted is fixed.
The problem where the system clipboard copy/paste functions did not work consistently is fixed.
The problem in Die Engineering where playing back a Journal recorded with Global Deformation required a different license is fixed.
The problem in Drafting where some assemblies with Altreps failed to open is fixed.
The problem in Assemblies where expressions in the Product Interface Dialog were not sorted is fixed.
The problem in Drafting where the cutting plane for a light weight section view was not calculated correctly for non-master drawing or assembly parts is fixed.
The problem in Knowledge Fusion where the Eyellipse feature failed to update from external spreadsheet is fixed.
The problem where the sketch dimensions that were displayed as PMI remained visible when the sketch was suppressed is fixed.
The problem where the drawing automation code was being executed twice during the booklet creation process, causing the duplication of dimensions, error messages, etc. is fixed.
The problem in Drafting where the table annotation was not returned when creating a table using automation is fixed.
The problem where it was not possible to make sketches internal for features in a Feature Group is fixed.
The problem where Make Sketch External for Extrude in a Feature Group did not place the sketch in group is fixed.
The problem in NX/Open where some User Functions returned tag arrays with only half of the tags is fixed.
The problem in NX/Open where the index was outside the bounds of an array is fixed.
The problem in NX/Open where UFAssem.AskDeformedDefinitionData() and UFModl.AskUdfDefinitionData() did not work properly in a 64-bit software version is fixed.
The problem in where the NX/Open command FETCH failed to open any part containing a Curve Analysis object in a batch mode is fixed.
The problem where the dependent feature of a Feature group did not update after selecting "Remove from Feature Group" is fixed.