CAMWorks 2012 + Delcam FeatureCam 2012 R2 SP1-SSQ
CAMWorks 2012 + Delcam FeatureCam 2012 R2 SP1-SSQ | 2.16 GB
CAMWorks - a module for creating NC programs for CNC machines. Programming milling turning turning milling and wire EDM module means CAMWorks. Also present in the assembly Delcam FeatureCam 2012 R2.
CAMWorks - a module for creating NC programs for CNC machines.
Programming milling turning turning milling and wire EDM module means CAMWorks.
* The module allows you to create programs CAMWorks milling turning turning milling and wire EDM. The following types of machines: milling with simultaneous control of two* five axles;
* CNC single and duplex with one or two slides with a programmable servo mechanism (tailstocks lunettes catcher details ...)
* Turning and Milling single and duplex with one or two slides with a programmable servo-mechanism with simultaneous control of two* five axles;* Erosion of the two-and chetyrehosevye.
Treatment is carried out directly in SolidWorks and directly on the model of SolidWorks. The results of the programmer are stored in the same model part or assembly SolidWorks. This provides full associativity of the model and the tool path that leads to the automatic renewal of the tool path when the model changes. When added to the SolidWorks model of any process data such as signs of roughness base tolerances of form and arrangement of surfaces tolerances on dimensions engineer-programmer always has immediate access to them which facilitates the selection scheme based on machine parts and the selection needed to ensure the specified quality parts of the tool and cutting conditions. Detail can be easily adapted to the needs of processing by for example to eliminate redundant processing elements in terms of geometry or by applying to the executive in the mid-size model of the tolerance. While working with the SolidWorks assembly can perform joint processing of multiple parts program processing a series of parts or just completely simulate all the real situation on the machine table - all the rigging logging of any complexity and so on - for the most complete account the realities of treatment at the early stages of creation of the program.
Delcam FeatureCam 2012 R2
FeatureCAM allows you to:
* Build or import item
* Identify the elements of the parts (holes pockets grooves surface milling etc.)
* Create and simulate the processing
* Generate NC code control program (UP)
The knowledge base processing technology increases the productivity of
* Select the tool
* Calculate speed and feed step and depth of cut
* Determines roughing and finishing operations
* Generates a processing path and NC code control program
You can specify the required degree of automation and change any created automatically processed.
* An extensive library of postprocessors with the ability to create your own or modify existing
* Optimization of feed
* API interface to create a macro programming and custom applications
* Documentation for works costing
* Built-in 3D simulation